RX-95 Pneumatic Hot Hole Punch & Press

The RX-95 models are both standard and configurable. They are designed to be used to melt holes, slots or shapes, for burning leather, cutting ribbon, or may be fitted with  interchaneable thermal tooling suitable for use on a vertically operated pneumatic press.

​Download RX-95 Pneumatic Hole Punch and Thermal Press Full Catalog.

A few of our most common models are listed below. (Click the images for the RX-95 product brochure.)

hole punch sealer webbing, webbing hole punch
RX-95 Thermal hole punch, nylon punch, heat punch

Model RX-95-PS2/PM2-RK Single-hole thermal punch

(direct pneumatic with basic heat control)

RX-95 Thermal pneumatic hole punching machine

Model RX-95-PM2-RK Multi-hole thermal punch 

(with optional Slug-catch tray)

RX-95-PS2-RK

 

Pneumatically operated hot single-hole punch with basic heat control. Ideal for placing holes in all types of synthetic material. Direct pneumatic operation frees both hands for work placement: stepping on the foot-pedal lowers the punch; releasing the foot-pedal raises the punch.



RX-95-M33-TK



Burn your logo, lettering, or fine artwork into leather, wood or plastics with consistency using a precision dwell timer.  Equipped with adjustable dwell timer and heated tooling area is 2”x3” (50x76mm). Uses a custom made magnesium die; artwork required. Other sizes are also available.

RX-95-PM2-RK

Pneumatically operated hot multi-hole punch with basic analog heat control. Direct pneumatic operation frees both hands for work placement: stepping on the foot-pedal lowers the punch; releasing the foot-pedal raises the punch. All RX-95 models include an adjustable material guide as shown.

 

This model shown at left is equipped with an optional Slug-catch tray, pneumatically timed to catch the falling hole slugs after each punch cycle.

 

 



OPTIONAL Stainless steel safety guard

RX-95-PS2-TK

Pneumatically operated hot single-hole punch with analog Dwell Timer and digital heater control. Punching process may be intiated by foot pedal for both hands free, or by two-button actuator which initiates a precision timed punch controlled by electronic timer. 

 

Temperature is finely controlled by the preset digital heat control.

Model RX-95-PS2-TK 

(with dwell timer and digital heat control)

RX-95-PML-RK

Pneumatically operated hot multi-hole punch with standard heat control. This model is using 5 solid 1/8" punches and our new XY adjustable webbing guides.

Place the webbing into the guides and step on the foot pedal to punch through the webbing. 

RX-95-PN2/PS2-RK with optional slug catch-tray

 

Pneumatically operated single-hole punch with basic heat control and optional pneumatic slug tray. Step on the foot-pedal to activate the hole punch and retract the tray. 

 

Releasing the foot-pedal brings the catch tray forward to prevent the melted hole slugs from falling onto the work area.

 

May be retro-fitted to almost any RX-95 model.

Copyright 2016, 2018 © All rights reserved.

NOVA TECH International, LLC • Graham, North Carolina USA • 336-513-5200 • 800-794-6682 • FAX 336-513-5213 • email

USA & Canada

​for more information

1-800-794-6682

CALL US NOW !

© 2013 NOVA TECH International, LLC All Rights Reserved.

Webcutter Hinges

Our hinges are one of the most important components of the Webcutter hot knife. They must allow free movement of the rotating knife without excess play for hundreds of thousands of cycles. These hinges have gone through several design improvements over the years, as shown below. To adjust them, note the video to the right of the hinge type.

Evolution of the Webcutter hinges from 1998 to present: